6.19.0
If your product is installed and working without any issues, we strongly recommend that you do not update your software/firmware.
Please send questions and comments about this document to [email protected].
Release Date: 2026-11-06
New Features
- (All Products) Added the "Set Range" and "Ramp Range" events. These events change a range of elements in an array variable with one event.
- (All Products) Expressions, such as in the If event, now support string variable comparisons and string literals.
- (BX-4KU) Added a button to the Warp and Blend dialog that copies a manual warp to other outputs.
- (BinloopX/RidePlayerX/V16X/V4X) Added support for a config.ini file on the SD card which can set the network settings and the active script name.
- (BX-4KU) The Warp and Blend dialog can now show grid lines and highlight selected points on the video output.
- (BX-4KU) Added a runtime-only blend and mask toggle to the Warp and Blend dialog.
- (BX-4KU) Added support for center texel sampling in MPCDI files.
Improvements
- (BX-4KU) The Warp and Blend dialog now remembers the grid line thickness when reopening the dialog.
- (BX-4KU) Grid snap in the Warp and Blend dialog now uses the output divisions and follows the perspective warp.
- (BX-4KU) Made usability improvements to the Warp and Blend dialog, and made its canvas larger.
- (BX-4KU) Warp can now be applied to video output 1 in quad output mode.
- (Product File Creator) Product File Creator no longer allows operator characters (such as + - * / < > = ! &) in variable or parameter names where they are invalid.
- (Product Files) Updated Norxe Unify product file to version 2.0. The JSON and ASCII protocols are now in one product file.
- (WinScript) The script import tool now shows its messages while it converts a script, not only at the end.
- (WinScript) The WinScript splash screen now shows the version number.
- (WinScript) WinScript now saves scripts faster.
Bug Fixes
- (All Products) Fixed controller crash that could occur when stopping a timed sequence that has a Loop event looping itself.
- (All Products) Fixed incorrect output from the product file sprintf function. This occurred when a comma in the value list had no space after it, or when a value was blank.
- (All Products) Fixed issue where reading an invalid EtherNet/IP PLC tag could cause other valid tag reads to fail if they were bundled in the same message.
- (All Products) Fixed issue where an invalid ASCII command received over TCP caused the controller to reject all later commands on that connection.
- (All Products) Fixed issue where product files discarded the characters that remained after a regular expression message matched in a TCP stream. Other regular expression messages can now match these characters.
- (All Products) Fixed issue where the controller used overly short timeouts when connecting to TCP devices, resulting in reconnections on high-latency networks.
- (All Products) Fixed issue where the controller generated SMPTE at startup after changing SMPTE from Read or Generate on Startup to Disabled (requires setting SMPTE to Disabled in WinScript again).
- (BX-4KU) The video output now shows a black frame during warp updates to prevent a flash when warp points are moved.
- (BX-4KU) Fixed issue where the BX-4KU applied an incorrect shape for some warps made in the Warp and Blend dialog.
- (BX-4KU) Fixed issue where the BX-4KU rejected 23.976 as the system frame rate.
- (BX-4KU) Fixed sync issues that could occur when the video output frame rate was different from the script frame rate.
- (BX-4KU) Fixed visual artifacts outside the canvas of the Warp and Blend dialog when dragging a selection box or warp point.
- (BX-4KU) Improved reliability while uploading or changing media files, especially during playback.
- (BinloopX) Fixed issue where the live log sometimes showed erroneous timeout errors after executing certain events.
- (Product Files) Updated Weigl ProCommanderAX product file to version 1.5. Fixed the "Get Specific Show Status" event, and status values now show in variable watches.
- (RidePlayer) Fixed issue where a RidePlayer set to read SMPTE would generate SMPTE instead.
- (RidePlayerX) Fixed issue where the "Get Version" event did not set the "Version" device variable (requires updating the product file in the script).
- (V16X/V4X) Fixed issue where a script name of 39 or more characters showed as a blank entry in the front panel Script menu.
- (V16X/V4X) Fixed issue where the DMX output could send random values at startup with certain devices.
- (V4X) Fixed issue (introduced in 6.17.0) where the factory default screen was missing from the front panel display.
- (WinScript) Fixed crash that could occur when deleting an event that was in a timeline group.
- (WinScript) Fixed crash that could occur when editing the properties of a third-party device array.
- (WinScript) Fixed crash that could occur when using Update From Local Files with subfolders in the Media window.
- (WinScript) Fixed issue on macOS where the X button did not close the Connection Manager.
- (WinScript) Fixed issue on Windows where the open and save dialogs always started in the Documents folder.
- (WinScript) Fixed issue where changing a device type could cause issues with built-in device variables for that device.
- (WinScript) Fixed issue where editing an event time in grid view moved the sequence window to the top.
- (WinScript) Fixed issue where media events would not show their new length until the timeline window is re-opened.
- (WinScript) Fixed issue where some serial settings, such as baud rate, went back to their default values when opening the device dialog again.
- (WinScript) Fixed issue where the Find window showed the wrong value after a replace when the new value contained the old value.
- (WinScript) Fixed issue where the Locale settings showed Orlando coordinates as defaults, but the firmware used 0 Lat, 0 Long.
- (WinScript) Fixed issue where the script import tool would become unresponsive while converting scripts.
- (WinScript) Fixed issue where the selected devices list showed the model name instead of the device name for some devices.
- (WinScript) Fixed issue where WinScript for macOS showed a lower controller utilization than WinScript for Windows for the same script.
- (WinScript) Fixed issues on macOS where the Connection Manager sometimes did not find devices, and where WinScript asked for folder access each time it started.
- (WinScript) Fixed issues with using device references in Live Mode and ShowTouch.
- (WinScript) When installing an older version of WinScript over a newer version, the Alcorn McBride product files are now replaced with the older versions.
- (WinScript) The Connection Manager no longer shows a green check mark for script compatibility when the script has unsaved changes.
- (WinScript) WinScript no longer asks to resize pages when making a new panel.