Specifications
VC12X
| Control | |
|---|---|
| Controls | 12 Pushbuttons /w Integrated LEDs |
| Receiver Volume Knob | |
| Config Switches | Link Mode |
| Firmware Update/Restore Factory Defaults | |
| Network Connectors | Female RJ45 |
| SFP | |
| Protocols | UDP, TCP, HTTP, Dante, AES67 |
| Audio | |
|---|---|
| Handset Connector | Female 4-Pin XLR |
| THD+N | < 0.07 % |
| Signal-to-Noise Ratio | > 85 dB |
| Input Impedance | > 30 MΩ |
| Frequency Response | 20 Hz – 20 kHz ± 1 % |
| Network Audio Interfaces | 1x1 Dante |
| 1x1 AES67 | |
| DSP Compatibility | Q-SYS Core 110f (AES67 Only) |
| Q-SYS Core 250i (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 500i (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 510i (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 1100 (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 3100 (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 5200 (AES67 Only) |
| Physical | |
|---|---|
| Power (PoE) | PoE Class 3 |
| Power (DC) | 5-37 VDC @ 1 A max. |
| Phoenix Terminal Block 1844210 | |
| Dimensions | 8” W x 10” H x 2” D (204 mm x 254 mm x 51 mm) |
| Weight | 1.5 lbs (0.7 kg) |
| Environment | 0° C (32° F) to 38° C (100° F) |
| 0-90 % Relative Humidity | |
| Compliance | WEEE, RoHS |
VC16K
| Control | |
|---|---|
| Controls | 16 Contact-Closure Button INputs |
| Receiver Volume Knob | |
| Config Switches | Link Mode |
| Firmware Update/Restore Factory Defaults | |
| Network Connectors | Female RJ45 |
| SFP | |
| Protocols | UDP, TCP, HTTP, Dante, AES67 |
| Audio | |
|---|---|
| Handset Connector | Pheonix Screw Terminal 1844249 |
| Panel-Mount Female 4-Pin XLR (Included) | |
| THD+N | < 0.07 % |
| Signal-to-Noise Ratio | > 85 dB |
| Input Impedance | > 30 MΩ |
| Frequency Response | 20 Hz – 20 kHz ± 1 % |
| Network Audio Interfaces | 1x1 Dante |
| 1x1 AES67 | |
| DSP Compatibility | Q-SYS Core 110f (AES67 Only) |
| Q-SYS Core 250i (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 500i (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 510i (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 1100 (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 3100 (AES67 or Dante via CDN64 I/O Card) | |
| Q-SYS Core 5200 (AES67 Only) |
| Physical | |
|---|---|
| Power (PoE) | PoE Class 3 |
| Power (DC) | 5-37 VDC @ 1 A max. |
| Phoenix Terminal Block 1844210 | |
| Dimensions | 9” W x 2.75” H x 2” D (229 mm x 70 mm x 51 mm) |
| Weight | 1.5 lbs (0.7 kg) |
| Environment | 0° C (32° F) to 38° C (100° F) |
| 0-90 % Relative Humidity | |
| Compliance | WEEE, RoHS |