Skip to content

SMPTE

The SMPTE tab allows you to configure the frame rate of the SMPTE LTC reader and generator, as shown in Figure 1, if available on your device. SMPTE is disabled by default.

SMPTE Settings
Figure 1 SMPTE Settings

Generate

When Generate is selected, you can select the Frame Rate and whether or not the LTC generator starts automatically on power-up, as shown in Figure 2.

Generate Settings
Figure 2 Generate Settings

Read

When Read is selected, you can select the Frame Rate and the Dropout Tolerance (from 1-99 frames), as shown in Figure 3.

Read Settings
Figure 3 Read Settings