Skip to content


Optional Parts

Development Kit


We offer this kit to enable users to quickly bench test or build mockups with RideAmp-250Q units. This kit includes prefabricated cables for each of the connectors on the unit. It also includes a 24V/20A DIN Rail power supply to power up the unit.

We recommend that new users order at least one of these kits to get started with RideAmp-250Q development. Since most on-board audio applications use highly customized cabling, this kit is probably not practical for wiring up an entire fleet of ride vehicles.

Connector Kit


This kit provides a full set of blank Molex connectors and pins for all RideAmp-250Q connectors. We offer this kit as a convenience to fabricators so that the individual parts don’t have to be researched and ordered. Unlike the Development Kit, the Connector Kit is intended to be used for fleet deployments. We recommend ordering a Connector Kit for each RideAmp-250Q in the ride vehicle fleet.

M12 X-Coded Ethernet Cable

Part Number: CM12X-2M

This is an M12 X-Coded patch cable that allows RideAmp-250Q to connect to an M12 X-Coded Ethernet switch. Our stock cable is 2 Meters (6.5ft) in length. For fleet deployments, we have the capability to manufacture cables to custom lengths to suit your application. Please contact us for quotes for custom length M12 X-Coded cables.

M12-to-RJ45 Ethernet Adapter

Part Number: CM12X-RJ45F

This is an adapter that converts from the M12 X-Coded connectors of RideAmp-250Q to a standard RJ45F Ethernet connector.

Power Supply

Part Number: PSD24V20A

This supply is capable of providing RideAmp-250Q with a 24VDC/20A power source. It accepts an input between 100-240VAC and is designed to mount on a DIN Rail alongside the RideAmp-250Q.